Neutrogena Light Therapy Acne Spot Treatment for Sensitive Skin, 1 ct , BLO10046

Directions:

Dosage: Treat for 2 minutes, 3 times a day.

Instructions: 1. Before using the Neutrogena Light Therapy Acne Spot Treatment for the first time, remove the pull-tab on the back of the device. 2. Wash and dry the area to be treated. Lightly place the head of the device over the area to be treated so it makes contact with your skin. 3. Press and hold the power button until it beeps once to begin your treatment. Each treatment is 2 minutes. 4. Neutrogena Light Therapy Acne Spot Treatment will turn off automatically after 2 minutes. The device will beep twice to let you know your treatment is over. Use three times per day per treatment area. How to Change the Battery If the device flashes/beeps three times after pressing and holding the power button for 1 second, the battery in your device is low. Loosen the screw on the battery cap of the device, slide off the handle, and replace the 1 AAA alkaline battery inside. Reassemble the device ensuring the cap is aligned, and the cap and screw are secured, before using the device again. Please follow local regulations where you live for proper disposal of battery operated devices Cleaning Clean the outside of the device whenever it appears dirty. Moisten a soft cloth with isopropyl alcohol and clean the head of the device after each use. Do not get water or liquid inside any part of the device. Other Information Operating Conditions 5°C to 35°C; 15%-75% Relative Humidity, non-condensing Atmospheric Pressure: 700-1060 hPA Conditions for Transport and Storage Between Uses -25°C to 45°C; up to 75% Relative Humidity, non-condensing Operating Parameters Blue Light Wavelength: 445 nm Red Light Wavelength: 630 nm Irradiance < 14 mW m-2 As with all medical electrical devices, there is possible interference with other electrical equipment. www.neutrogena.com / www.neutrogena.ca Questions? USA 1-800-582-4048 CAN 1-888-663-8876; Outside US/CA, dial collect 215-273-8755